"Made In The USA!"

Secure Online Shopping:

Loading...

Navigation

Contact Us

CARVER Custom

Customer Service

(904) 800-6333

Extension 2

Monday - Friday
10:00 AM to 4:00 PM

(Eastern Time Zone)

 

Order Online 24/7

Orders Received by 4:00 PM Mon-Fri

Shipped Same day

Local Pick-up at Shop

Available

Monday - Friday

1:00 PM to 4:00 PM

(Eastern Time Zone)

by Appointment Only


Click Here to E-Mail

 

  Disclaimer

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.mbH. Neither B&B Enterprise, Inc., nor this site are affiliated in any manner with, or otherwise endorsed by, Glock, Inc. or Glock Ges.mbH.  The use of “Glock” on this page is merely to advertise the sale of Glock pistols, parts, or components.  For genuine Glock, Inc. and Glock Ges.mbH products and parts visit www.glock.com.

M&P .45 Compensator and Magwell Combo

Be the first to review this product

Availability: In stock

$178.00

Quick Overview

Combo Includes:


Qty 1:  M&P Aluminum .45 Compensator (3 Port or 4 Port)


Qty 1:  M&P45 Aluminum 1.0 Open Magwell

M&P .45 Compensator and Magwell Combo

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

* Required Fields

$178.00

Details

Compensator (3 or 4 Port)

CARVER Custom .45 ACP 3 or 4 port compensators for your M&P factory supplied threaded .45 barrel are an exclusive offering. These comps were designed to fit the countour of the Full Size .45 slide and to appear as an extension of the slide. The compensators are made out of tough 6061-T6 aircraft aluminum and have Type 2 anodizing in two colors: Black and Silver.

Benefits of this compensator include:

  •  Large expansion chamber leading into 1 retaining port
  • Porting on the sides, allows more air to rush into the compensator, pushing more exhaust up, allowing more control of the muzzle
  • Comp weight 1.2 oz
  • Guiderod channel under compensator
  • Controls muzzle flip and recoil up to 40% dependent upon type of ammunition used. The higher power factors will deliver more efficiency.
  • Stylish and effective!!
  • Excellent for IPSC Major, bowling pin or fun shooting

    The comps are threaded for .578 x 28 tpi barrels. They will fit an M&P threaded barrel that's intended for a suppressor.

When using the CARVER Custom compensator system, you will need to use a lighter recoil spring to compromise the slide speed since the compensators are so efficient they are reducing the amount of energy normally utilized by the slide to recycle.

If you are planning to shoot the following ammunition, you will need the recommended recoil spring with an uncaptured guiderod:

185 Grain .45 ACP Ammo

  • With 3 Port Compensator - Use a 14 lb recoil spring
  • With 4 Port Compensator - Use a 13-14 lb recoil spring

200 .45 ACP Ammo

  • With 3 Port Compensator - Use a 15 lb recoil spring
  • With 4 Port Compensator - Use a 14-15 lb recoil spring

230 Grain .45 ACP Ammo

  • With 3 Port Compensator - Use a 16 lb recoil spring
  • With 4 Port Compensator - Use a 15-16 lb recoil spring

==========================

Open Aluminum Magwell

"Newly Designed" M&P Aluminum Magwell for Open Class Competition by CARVER Custom LLC..  This new M&P Open magwell was designed for IPSC or any "open" class of competition where a magazine extension is allowed. The new magwell was designed for the M&P Full Siz.45 model.  The Magwell is currently available for the 1.0 version of the M&P .45 model.  The 2.0 version will be available soon.

The aluminum magwell is CNC machined and anodized. It is very easy to install and requires no modification to your gun. Included with the magwell are installation instructions and all necessary hardware. Requires the use of any Magazine Extension (140MM or 170MM) or extended base pad such as the Springer Precision base pad.

This magwell is a funnel that's 1.6" wide and is 2.6" long, increasing the magwell area for fast and easy reloads on the run or while standing by 165% when compared to the stock magwell opening on the M&P.  Approximate weight is 1.4 oz.  (Please note, a Tactical Model will be available soon)

This magwell and its installation stud will work on M&P Models1.0 model only.

The new design allows your choice of backstraps to be used.

The "new" CARVER Open M&P Standard Magwell requires the use of a Magazine Extension such as the TF +3 Mag Extension or extended base pads such as the Springer Precision base pad. Stock base pads will "not" allow the magazine to lock into place.

If you have any questions about our "new" Open M&P Standard Magwell model, please contact us at sales@carvercustom.com.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Click to add text...

Contact Us

Tel: 904-800-6333 (Sales/Support)

Monday - Friday 10:00 AM - 4:00 PM

(Eastern Time Zone)


Click Here to E-Mail

HERE

Address

CARVER Custom LLC

5570 Florida Mining Blvd S

Building 100, Suite #106

Jacksonville, FL 32257

 

"At B&B Enterprise, your satisfaction is our goal. We feel that the CUSTOMER continues to be right!"

Mobile Site | Back to Top