12143 Corner Oaks
Jacksonville, FL 32223
"CARVER Custom Parts & Mounting Systems"
DISCLAIMER: "GLOCK" is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.mbH. Neither B&B Enterprise, Inc., nor this site are affiliated in any manner with, or otherwise endorsed by, Glock, Inc. or Glock Ges.mbH. The use of "Glock" on this page is merely to advertise the sale of Glock pistols, parts, or components. For genuine Glock, Inc. and Glock Ges.mbH products and parts visit www.glock.com.
(Temp Out) CARVER Custom M&P 3 Port Comp (9MM)CARVER Custom 9MM 3 port compensator for your M&P. These comps were designed to fit the countour of the slide and to appear as an extension of the slide. The compensators are made out of tough 6061-T6 aircraft aluminum and have Type 2 anodizing in two colors: Black and Silver.
Benefits of this compensator include:
Large expansion chamber leading into 2 retaining ports
Porting on the sides, allows more air to rush into the compensator, pushing more exhaust up, allowing more control of the muzzle
Comp weight 1.3 oz
Guiderod channel under compensator
Controls muzzle flip and recoil up to 45% dependent upon type of ammunition used. The higher power factors will deliver more efficiency.
Stylish and effective!!
Excellent for IPSC Major or minor loads
The comps are threaded for 1/2 x 28 tpi barrels. Though they will fit an M&P threaded barrel that's intended for a suppressor, we recommend the use of a shorter barrel that will allow the compensator to snug up to the end of the slide. We stock custom barrels for the M&P that will fit with the compensator. If you have any questions, please feel free to call or email.
Compensators will fit the following 9MM Smith & Wesson models:
M&P Full Size
M&P L Size
When using the CARVER Custom compensator system, you will need to use a lighter recoil spring to compromise the slide speed since the compensators are so efficient they are reducing the amount of energy normally utilized by the slide to recycle.
Recoil springs recommended if using factory ammunition or equiavalent. Major loads will require heavier springs such as a 14-16lb.
11-12 lb spring for soft 9MM ammunition up to 140K PF
Coming soon......CARVER Custom "Big Mouth" magwells for the M&P plus scope mounting systems"
Our Price: $95.00